Electrician in Port Talbot | EICR, EV & Rewires

A proper local electrician in Port Talbot.

Aled covers Port Talbot properly, SA12 and SA13, from base in Pencoed. EV chargers from £900 + VAT, fuse boards from £700 + VAT, EICRs at £200 + VAT, rewires, lighting and fault finding. Quoted by Aled, fitted by Aled, certified to BS 7671. No travel padding on the bill and no waiting weeks for a survey.

NAPIT registered 5.0 on Google, 45 reviews Based in Pencoed, Bridgend

Post-war stock, sea air, and a lot of boards past their time

Port Talbot is a straight run west along the M4 from Pencoed, the next town on from Pyle, which has been on the patch from the start. Aled works right across it: Aberavon and Sandfields down by the front, Baglan and Briton Ferry at the western end, and Taibach, Margam, Cwmavon and Pontrhydyfen inland up the valley.

The housing tells you what the work is going to be. Sandfields went up in the 1950s to house the steelworks, and a great deal of Port Talbot is post-war and inter-war stock built long before anyone was charging a car on the drive or running a kitchen full of modern appliances. That shows up as consumer units with no RCD protection and not a spare way in them, circuits carrying far more than they were designed for, and installations quietly past their working life. A fuse board upgrade or an EICR is usually where it starts.

The coast is a genuine technical factor here, not a line of colour. Anything mounted outside in Aberavon or Sandfields sits in salt-laden air a few hundred metres off the beach, so external enclosures, EV chargers, garden and outbuilding supplies need the right IP rating and proper gland and termination work if they are not going to corrode early. It is the sort of detail that gets skipped on a cheap job and costs you the unit a few winters later.

Port Talbot also has a substantial rental market, so landlord EICRs are steady work. Every rented home in Wales needs a valid Electrical Installation Condition Report every five years, and it has to reach the contract-holder within 14 days of the inspection, or the property can be treated as unfit for human habitation even where the wiring passed perfectly well.

Covered in and around Port Talbot

Aberavon Sandfields Baglan Margam Taibach Cwmavon Port Talbot town Briton Ferry Pontrhydyfen M4 J38 to J41

What people in Port Talbot ask.

Do you cover Port Talbot?

Yes. Port Talbot is a regular part of the patch, a straight run west on the M4 from base in Pencoed and the next town on from Pyle. That covers Aberavon, Sandfields, Baglan, Margam, Taibach, Cwmavon and Briton Ferry.

How much is an EICR in Port Talbot?

£200 + VAT (£240 inc VAT), fixed, for a standard residential property. Same price for homeowners and landlords, every circuit tested, with the signed report back the same or next day so you can serve it inside the Welsh 14-day window.

How much does a new fuse board cost in Port Talbot?

From £700 + VAT (£840 inc VAT), usually fitted in a day. A modern 18th-edition board with full RCBO protection, tested, certified and notified to building control. A lot of the post-war stock around Sandfields and Taibach is still on a board with no RCD protection at all.

Can you fit an EV charger near the seafront?

Yes, from £900 + VAT, fully fitted. Being close to the sea does matter: salt air is hard on anything mounted outside, so Aled specifies the enclosure, IP rating and terminations for a coastal position rather than treating it like an inland install. He checks your fuse board and main supply fuse first, because plenty of older Port Talbot properties are still on a 60 or 80 amp supply.

Is there a call-out charge to come to Port Talbot?

Any call-out is agreed with you in writing before Aled attends, so there is never a surprise on the bill. Quotes for planned work are free and there is no obligation to go ahead.